Reasons for the poor quality of the raw materials of led lighting fixtures

1. The color of the wall lamp should be in harmony with the decoration style of the home environment. The layout of lighting fixtures in the house must fully consider the design style of the furniture in the house, the hue of the wall and the hue of electrical products.

2. The wall lamp manufacturer feels that the specifications of the wall lamp should be equipped according to the total area of ​​the room, the total number of furniture and the corresponding specifications. For example, for a small and large living room below 12 square meters, ceiling lamps or wall lamps with a diameter below 200m should be used. In a large living room up to 15 square meters, ceiling lamps or multi-pronged ceiling lamps with a diameter of up to 300m should be used, and the diameter of the lamps should not exceed 400mm.

3. Security. First look at its quality, to see if the quality assurance and certificate of conformity are complete. Sometimes expensive is not necessarily good, and too cost-effective is undoubtedly not good. Wall lamp manufacturers feel that many cost-effective lamps are of poor quality and usually have many safety hazards. In the event of a fire accident, adverse effects cannot be predicted.

4. Grasp the development trend of lighting fixtures. There are many styles of lamps and lanterns, and manufacturers feel that they should understand the development trend of contemporary lamps before buying them, so as to prevent the newly bought lamps from being out of use.

5. Check carefully when buying lamps. The lighting fixtures are mainly made of laminated glass, which is very fragile. After long-distance freight, it is difficult to avoid scratches or damage. Since lighting fixtures are generally hung in the more conspicuous parts of the home, even minor damage will harm the actual effect of the application.

6. The wall lamp manufacturer feels that the style of the lamp should be selected according to their specific needs and personal preferences. For example, if you attach importance to the applicability of lamps, you should choose dark brown headlamps or floor lamps such as gray-black and dark red. If you pay attention to decorative design and pursue perfect modern simplicity, you can choose brisk lighting effects. If you like lamps with ethnic styles, you can choose floor lamps with sculpture processing techniques.

Many LED Christmas Party Lights covers will turn yellow under the heat radiation of the light source, so it will damage its beauty and elegance. In addition, the LED modeling lamp must always be eroded by rain and wind, and the same is also very easy to suffer. Damaged by human error, there are a lot of wetland parks installed widely-some solar power stations have buried lights, and most of their solar power solar panels are long gone, so the beauty of big cities has become -A not-so-good factor. Modeling lamp manufacturers' raw materials and led lumens have caused poor animation special effects: this type is important or caused by raw materials, and it does not use refractive index or landscape lighting, which promotes the low characteristics of optoelectronic devices, and should not be able to reach The expected effect.